Downloads

Op de downloadpagina vind je gratis updates voor je FRITZ!-product. Selecteer je product en profiteer na het downloaden van nieuwe functies en uitbreidingen van onze ontwikkelingsafdeling. Deze inhoud is beschikbaar in het Engels.

Gevonden resultaten:
FRITZ!Repeater 1200 / FRITZ!OS 7.27

FRITZ!OS is the software of the FRITZ!Repeater. Use the online update function to easily download the current FRITZ!OS version into your FRITZ!Repeater.

New performance characteristics:
  • **New Features**
  • Improved automatic setup of a LAN connection of the FRITZ!Repeater to a FRITZ!Box with Mesh [1]
  • Improved assistent for inital setup and the change of the connetion type (LAN connection / WiFi connection)
  • Improved WiFI stability and performance **Additional improvements in FRITZ!OS 7.27**
  • **Improved** Improved confirmation message when adoption of settings in the Mesh disabled
  • **Improved** Improved confirmation message when network settings changed
  • **Improved** Improved messages on Wi-Fi under "System / Event Log"
  • **Improved** Detection of multiple parallel WPS activations improved
  • **Improved** Reworked messages on DFS wait time under "System / Event Log"
  • **Improved** Naming of Wi-Fi guest access (SSID, preassigned) depends on selected language
  • **Improved** Stability of the Wi-Fi guest access improved
  • **Fixed** Vulnerabilities in the processing of incoming fragmented frames and aggregated MPDUs (A-MPDU) fixed ("Fragatttack")
  • **Fixed** WPS for the Wi-Fi Guest Access did not work reliably with non-encrypted Wi-Fi
  • **Fixed** In some cases, the 5 GHz connection was not established immediately after connectiong with WPS
  • **Fixed** Data transfer could be interrupted when switching from 5 GHz to 2,4 GHz when the FRITZ!Repeater has a weak 5 GHz signal
  • **Fixed** Interruption while streaming video when using IPv6 connections
  • **Fixed** After connecting the FRITZ!Repeater to the FRITZ!Box, in some cases only the 2,4 GHz connection was established
  • **Fixed** - Improved maximum throughput when used with current Apple iOS and MacOS devices
  • **Fixed** WiFi power setting could not be changed in LAN-bridge mode
  • **Fixed** Interruption of the LAN connection after a restart of the FRITZ!Repeater
  • **Fixed** Wrong tip regarding the use of the FRITZ!Box password when mesh is not activated
  • **Fixed** Changes in the network settings were not applied when the user switched between different settings
  • **Fixed** Number of messages in "System / Event Log" was too smal in some areas
  • **Fixed** When parallel WPS registrations were detected they were not ended reliably
  • **Fixed** Wrong default country after setting factory defaults (only for german editions of FRITZ!Repeater)
  • **Fixed** The "Support" page could no longer be opened directly
  • **Fixed** Unintentional display of LAN port settings
  • **Fixed** Wrong timestamp for the last FRITZ!OS update
  • **Fixed** In rare cases, multiple radar wait times occurred in the 5-GHz band followed by lost connections
  • **Fixed** In rare cases, the 5-GHz connection to the FRITZ!Box was lost
  • **Fixed** When Wi-Fi standard switched from "11a+n" to "11n+ac", problems with channel assignments occurred in some cases
  • **Fixed** Incorrect message under "System / Event Log" for WPS during DFS wait time ----------------------------------- ** [1] Automatic detection an configuration of operating mode ** For configuration of a FRITZ!Repeater in "LAN Bridge" mode (using a repeater connected with the FRITZ!Box by cable as the wireless access point), previously the FRITZ!Repeater user interface had to be opened. Making this setting is no longer necessary with this lab version - the FRITZ!Repeater automatically detects the operating mode.
  • Factory settings must be configured in the FRITZ!Repeater (to reset the factory settings: Wait 2 minutes for the FRITZ!Repeater to be completely startet, than press and hold the button on the repeater for at least 15 seconds).
  • Remove the repeater from the outlet.
  • Connect the FRITZ!Repeater with any LAN port on the FRITZ!Box via LAN cable.
  • Insert the FRITZ!Repeater into an electrical outlet. Upon starting, the repeater is already set to "LAN Bridge" mode.
  • Now enable the repeater for Mesh (press briefly on the button on the repeater, and briefly on the "Connect/WPS" or "WPS" button on the FRITZ!Box). Now the repeater adopts the settings and forms a Mesh Wi-Fi with the FRITZ!Box. More information on this subject is available at en.avm.de/mesh.
  • If you want to switch back to a connection of the FRITZ!Repeater to the FRITZ!Box via WiFi, remove the LAN-cabel from the FRITZ!Repeater and repeat the process without connecting a LAN-Cable
File size:
17890 KB
Version:
FRITZ!OS 7.27
Datum:
01-07-2021