Updatenieuws

The update file "FRITZ.Box_5590-xx.xx.image" contains the latest FRITZ!OS (Firmware) for the FRITZ!Box 5590 Fiber.

Attention: This update file is only intended for use with FRITZ!Box 5590 Fiber! Please follow the instructions at the end of this file to install the update.

Produkt:        FRITZ!Box 5590 Fiber
 
Version:        FRITZ!OS 8.0

Language:       Dutch, English, French, German, Italian, Polish, Spanish

Release date:   24.10.2024

With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices.

New features:

• User interface: Diagram showing the connections in the overview (homepage)
• New Online Monitor informs about the load on the internet connection and the load by individual network devices.
• Internet: Now IPv6 data can also be transmitted via a WireGuard® VPN tunnel
• Mesh: Redesigned diagram of all devices connected with the FRITZ!Box with additional functions
• Push service: Reworked design and more convenience

Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version.

New features and improvements in FRITZ!OS 8.00

Fiber:

• **Improved ** Fiber optic module is disabled for internet access via the WAN port

Internet:

• **NEW ** IPv6 data now can also be transferred via a WireGuard® VPN tunnel (new WireGuard® connection required, no forwarding of IPv6 data to the internet)
• **NEW ** New Online Monitor diagram with expanded information on the load on the internet connection by individual network devices
• **NEW ** Extend online time restricted through parental controls by 45 minutes directly in the detailed settings of the network device
• **Improved ** When sharing internet access to FRITZ!Box services, an additional IP block list from AVM can be used
• **Improved ** For VPN network couplings via WireGuard®, the "fritz.box" domain is resolved in the entire coupled network
• **Improved ** For VPN network couplings via WireGuard®, the domain of the remote site can be specified for DNS resolution
• **Improved ** More precise explanations of errors during the configuration of WireGuard® connections
• **Improved ** Added notification about potential risk of sharing port 80 or 443
• **Improved ** Preselection of easiest configuration method for the internet providers Telekom, Vodafone, and EWE for initial configuration on a fiber optic connection
• **Improved ** Improved details during the initial configuration behind a fiber optic modem (ONT)
• **Improved ** Selection of automatically fair bandwidth distribution in the home network including Ingress shaping as own option in the prioritization settings (not in FRITZ!Box 5530 (PRX), not in FRITZ!Box models exclusively for mobile networks like FRITZ!Box 68xx, and not in FRITZ!Box Cable models)
• **Improved ** The FRITZ!Box user interface can also be opened in the home network by entering "fritzbox.internal" and "fritzbox.home.arpa"

Wi-Fi:

• **NEW ** Visualization of Wi-Fi usage in the home network for the last 7 days added on "Wi-Fi > Wi-Fi Channel"

Mesh:

• **NEW ** Definition of a name and an icon for network devices directly in the Mesh Overview diagram (tooltip)
• **Improved ** Details about the LAN connections between FRITZ! devices given in the Mesh Overview diagram (tooltip)

Telephony:

• **Improved ** Recordings on the answering machine now with higher voice quality (HD audio)
• **Improved ** The "Enable encrypted telephony" option is offered for the provider "Drillisch GmbH"
• **Improved ** Order of telephone numbers in telephone book entries can be changed more easily
• **Improved ** The call list shows the country, or for domestic calls, the location, where the call originated

DECT/FRITZ!Fon:

• **Improved ** Display of Wi-Fi account information can now be switched on or off for each FRITZ!Fon
• **Improved ** Easier deletion of multiple emails via the "delete multiple" option
• **Improved ** "Weather" start screen now available in all countries

Home Network:

• **NEW ** Names can now also be assigned to devices that use the guest access
• **NEW ** Improved overview through individual icons for network devices
• **Improved ** Detailed settings of a device on the "Home Network > Network Connections" page redesigned
• **Improved ** Troubleshooting and settings for speeds on WAN/LAN connections reworked
• **Improved ** Random calculation of the Unique Local Address (ULA, IPv6) in accordance with RFC 4193)

Smart Home:

• **NEW ** On the device page of FRITZ!DECT 350 window sensor in the FRITZ!Box user interface, window open detection can be configured for the selected radiator controls
• **NEW ** The templates also allow the user to set the target temperature for radiator controls; the brightness, saturation, and color for lights, and the position for roller shutters in percentage steps
• **NEW ** The temperature settings for the radiator control can be restricted to a lowest and highest temperature (from software version 5.20 for FRITZ!DECT 301 and FRITZ!DECT 302)
• **NEW ** Routines can also be triggered by a preset time or a time relative to sunrise/sunset
• **Improved ** Reworked registration of Smart Home devices via the FRITZ!Box user interface

System:

• **NEW ** New diagram of the FRITZ!Box connection status in the overview (homepage)
• **Improved ** File name for saved settings now includes name of individual FRITZ!Box
• **Improved ** A personal subject line can be be specified for push service
• **Improved ** Reworked configuration of push service
• **Improved ** Communication to all AVM services for the FRITZ!Box (update, etc.) preferentially via IPv6 with fallback to IPv4
• **Improved ** Link to reset the password more prominent in the "Forgot password" email
• **Improved ** With "Diagnostics > Function" the services for the Network Time Protocol are checked and relevant information displayed about any errors found
• **Improved ** Simplified address changes in push service through the new default recipient, which can be specified independently of the sender
• **Improved ** Changes to sender information for email from push service require additional confirmation
• **Improved ** Shorter interval for sending push service emails with notifications on user logins with the FRITZ!Box
• **Improved ** "Transfer Your Settings to a New FRITZ!Box" wizard improved for a smoother switch from DSL to fiber optic or cable
• **Improved ** More reliable detection of FRITZ!Box updates already performed through use of the "Transfer Your Settings to a New FRITZ!Box" function

USB/Media Server:

• **Improved ** Energy-saving function now also works with USB storage devices in Green Mode (USB 2.0)
• **Improved ** Data packets downloaded from fritz.nas now include the name of the given FRITZ!Box model and a time stamp in the file name to ease identification

Powerline:

• **NEW ** Password for all devices in the powerline network can be changed with a single click

Additional Improvements in FRITZ!OS 8.00

Internet:

• **Changed ** The AES-192 encryption algorithm is no longer supported in Phase 2 SAs of VPN connections
• **Changed ** The hash algorithm MD5 and the 3DES encryption algorithm are no longer used on VPN connections over IPSec for reasons of security
• **Changed ** The IPv6 option "Assign unique local addresses (ULA) as long as no IPv6 internet connection exists (recommended)" is no longer offered
• **Changed ** In PPPoE passthrough operation of the FRITZ!Box, DNS root queries are no longer filtered via UDP
• **Fixed ** Under some circumstances the network traffic of a connected telephone system was not routed via a specially configured VoIP interface
• **Fixed ** Under certain circumstances, OpenWrt devices operated behind a FRITZ!Box did not receive an IPv6 connection to the internet
• **Fixed ** Independent port sharing (UPnP) for the same port with various home network devices did not work under certain circumstances
• **Fixed ** In some circumstances active WireGuard® connections were interrupted when adding or deleting WireGuard® connections
• **Fixed ** VPN connections via WireGuard® to an endpoint given as multiple (comma separated) domains could not be established

Wi-Fi:

• **Changed ** For improved compatibility with older wireless devices, security settings can be adjusted on the "Wi-Fi > Security" page
• **Changed ** Text reference to selection of "WPA2 + WPA3" Wi-Fi encryption removed
• **Fixed ** Display of Wi-Fi properties of a registered wireless device was in rare cases incorrect
• **Fixed ** When 5-GHz channels were checked for radar (DFS), no wait cursor was displayed under these channels in the user interface
• **Fixed ** Repeaters that were logged into the guest network were not marked as "Wi-Fi guests"

Home Network:

• **Changed ** Recommendation to enable the automatic update search at the bottom of the Mesh Overview page

System:

• **Changed ** The link generated by "Forgot Password" push service in the email is valid for 20 minutes
• **Fixed ** After results of functional diagnostics were sent, an event message about changed FRITZ!Box settings was displayed
• **Fixed ** The "Live TV" button for Magenta TV streaming was missing in the user interface when displayed on smartphones and tablets
• **Fixed ** When accessing the FRITZ!Box interface via the internet (https), individual elements or pages were sporadically missing

USB/Media Server:

• **Fixed ** Files in a folder on the highest level of a file tree could not be moved, copied, or deleted via FTP
• **Fixed ** In certain constellations, access to NAS contents via download link was not possible

Previous Versions of FRITZ!OS

Improvements of FRITZ!OS 07.81

Internet:

• Fixed During active VPN connection over WireGuard® with transmission of entire network traffic, the FRITZ!Box allowed selection of user for HTTPS access
• Fixed In certain browser versions https pages were not filtered reliably
• Fixed Incorrect entry for the NTP server in DHCPv6 reply of the FRITZ!Box resulted in IPv6 home network devices not being able to obtain a valid time

Telephony:

• Fixed Telekom CompanyFlex SIP trunking - Outgoing calls failed when telephone number suppressed
• Fixed Under certain conditions, voice transmission was disrupted after a short time during ongoing telephone calls

Smart Home:

• Fixed Devices that were registered with the FRITZ!Smart Gateway were not displayed on the user interface of the connected FRITZ!Box
• Fixed Link for automatic adjustment between an external temperature sensor and a radiator control was lost when the FRITZ!Box restarted
• Fixed Status of the FRITZ!DECT 350 was transmitted incorrectly in the Smart Home home network
• Fixed The freely selectable device name for FRITZ!DECT 350 was not adopted
• Fixed Under certain circumstances empty Smart Home pages were displayed in the FRITZ!Box user interface

System:

• Fixed After failed download of a FRITZ!OS update, under certain circumstances no further update queries
• Fixed When using the "Transfer Your Settings to a New FRITZ!Box" wizard, a backup of the FRITZ!Box internal memory unnecessarily included files that were saved on an external USB storage device connected to the FRITZ!Box
• Fixed When using the "Transfer Your Settings to a New FRITZ!Box" wizard, a successfully established internet connection via DOCSIS was sporadically not detected and an incorrect error page was then displayed
• Fixed When using the "Transfer Your Settings to a New FRITZ!Box" wizard, an error occurred if an IPv4 address range other than the preset range was used in the home network
• Fixed When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the "Factory settings" status of the new FRITZ!Box was not always reliably detected and it was not possible to transfer the settings
• Fixed When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the IP filter list was not transferred to the new FRITZ!Box
• Fixed When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the settings for DNS rebind protection were not transferred to the new FRITZ!Box
• Improved When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the settings for the captive portal of a public Wi-Fi hotspot are now transferred to the new FRITZ!Box

New functions of FRITZ!OS 07.80

Fiber:

• NEW Detailed information on the fiber optic connection added to "FRITZ!Box Info" push service
• NEW Reworked fiber optic overview for FRITZ!Box on the fiber optic connection [1]
• NEW Simplified configuration through helpful hints about activating the FRITZ!Box for various internet providers

Internet:

• NEW Simplified configuration for connection to a fiber optic modem (ONT)
• NEW The speed of the Ethernet connection between LAN 1/WAN and the upstream device (e.g., fiber optic modem) is displayed on the overview page

Further Improvements of FRITZ!OS

Fiber:

• Improved Interoperability to various fiber optic remote sites improved

Internet:

• Fixed IPv6 sharing settings as "Exposed Host" for devices with delegated IPv6 prefix were sporadically deleted
• Fixed Problem with DNSSEC validation in FRITZ!OS
• Fixed When an internet connection was reestablished, occasionally an outdated IPv6 prefix was not deleted on a downstream router
• Improved Increased robustness of time determination (NTP)
• Improved New provider "Odido" can be selected for the Netherlands
• Improved Option for postponing automatic clearing of connection by the provider extended by adding a period that can be selected for "other provider"

Telephony:

• Fixed During an active parallel call, after a brief period the call was signaled only at the call destination
• Fixed Termination of outgoing calls to certain mobile sites after two minutes
• Improved Telephony more stable

DECT/FRITZ!Fon:

• Change Presets for the Deutschlandfunk web radio stations were updated

Wi-Fi:

• Fixed Connection problems with the Nuki Smart Lock
• Improved Wi-Fi performance optimized

System:

• Fixed "Configuring the Internet Connection" wizard was displayed although the device had already been configured by the provider
• Fixed Failure of switching from a FRITZ!Box Cable to a FRITZ!Box Fiber when using the wizard
• Improved Loading times of the FRITZ!Box user interface for internet access via LAN 1/WAN optimized
• Improved Stability

New functions of FRITZ!OS 7.56

System:

• NEW In the new energy-saving mode, Wi-Fi, LAN and USB use even less power for slightly reduced performance
• NEW New wizard transfers all important Internet, telephony, and WLAN settings as well as connections to mesh, telephony, and smart home devices to a new FRITZ!Box <for more, see [7]>

New Features in FRITZ!OS 7.50

Internet:

• NEW Automatic prioritization provides for fairly distributed data rates throughout the entire FRITZ!Box network (home network and guest network)
• NEW VPN with WireGuard for simple setup of fast, secure VPN connections <for more, see [2]>
• NEW Display of the cable spectrum in the user interface (FRITZ!Box 6591, 6660, 6690)
• NEW The MyFRITZ! direct connection allows you to receive information on the FRITZ!Box in real time on MyFRITZ!Net.

Mesh:

• NEW In Mesh Repeater operating mode, connections to the Mesh Repeater with multiple Wi-Fi bands are now possible <for more on this, see [3]>

Telephony:

• NEW Call handling allows call blocks and call diversion (e.g. to answering machine) for callers "not in the telephone book" (telephone book as positive list)
• NEW On a SIP DDI line for corporate customers, call diversion settings can be configured so that the caller number is displayed at the destination (partial rerouting)

DECT/FRITZ!Fon:

• NEW The new, optional "Voice" ringtone announces the name in the telephone book that matches the caller number, or the location and the telephone number. For an alarm or appointment, the ringtone announces the reason for the reminder <for more on this, see [1]>
• NEW The new FRITZ!Fon convenience function "Appointment Calendar" rings to remind about appointments
• NEW Handset can display WiFi password, also QR Code for convenience, Can be protected by PIN code

Smart Home:

• NEW Configure and apply scenes to generate the mood for any occasion <for more on this, see [5]>
• NEW Create and enable or disable routines (if-then combinations) for automatic interactions in the Smart Home <for more on this, see [5]> **NEW Templates for the comfort functions switch Wi-Fi access, switch Wi-Fi guest access, start telephone call, switch answering machine, send email (push service), and open web service (URL)
• NEW Selection of an additional display of the temperature and humidity profile on the FRITZ!DECT 440
• NEW Natural lighting sequences for device groups and templates with FRITZ!DECT 500
• NEW Support for compatible external window sensors for the radiator controls' open window detection

USB:

• NEW Support for storage media formatted in exFAT

System:

• NEW "Help and Info" in the user interface: A completely overhauled help function with many instructions based on user scenarios and a strong search engine

FRITZ!Apps:

• NEW MyFRITZ!App offers the option to enable prioritization for internet access on each home network device
• NEW MyFRITZ!App allows home network devices to be renamed
• NEW MyFRITZ!App allows a MyFRITZ! account to be created for MyFRITZ! internet access to the user interface of the FRITZ!Box (for iOS)
• NEW FRITZ!App Smart Home supports scenes and the enabling and disabling of routines <for more on this, see [5]>
• NEW FRITZ!App TV allows the TV function (DVB-C) and station search to be enabled for FRITZ!Box Cable devices

Further Improvement of FRITZ!OS 7.58

Internet:

• Fixed ppp connection fails on some lines

Wi-Fi

• Changed Wi-Fi 6 signal fields adjusted

Further Improvements of FRITZ!OS 7.57

System:

• Fixed stability and security increased

Further Improvements of FRITZ!OS 7.56

Internet:

• Improved Clarified wording when configuring WireGuard VPN connections
• Improved NTP interoperability improved through better estimation of the hardware clock's deviation
• Improved Optimization of bandwidth reservation in the home network through adjustment to transmitted downstream rate
• Improved Optimized switching from public DSN servers to provider-side DNS servers
• Improved The setting to send all IPv4 data traffic of the FRITZ!Box via the WireGuard VPN connection to (!) a single device is no longer supported
• Fixed "Reserve bandwidth in the home network" did not work with IPv6
• Fixed During preparation of the first WireGuard connection via remote dial-in the FRITZ!Box ended up in permanent wait mode
• Fixed In certain scenarios, switching the type of internet connection led to the WAN interface being switched to LAN
• Fixed Interoperability of IPSec VPN connections to LANCOM remote sites including usage of VNC and RDP with active packet acceleration not available
• Fixed MyFRITZ! access permission (device sharing) could sometimes only be terminated via IPv4
• Fixed Occasionally an IPv6 prefix sharing of a previous "outdated" prefix for a downstream router was not deleted
• Fixed On DS Lite connections, switching off IPv6 manually (incorrect configuration) could result in repeated dial-in attempts by the FRITZ!Box
• Fixed On TIM connections (Telecom Italia), configuration of a WireGuard connection led to repeated clearing of the internet connection
• Fixed Parental controls: Tickets for devices with the standard profile could not be redeemed
• Fixed Problems with functionality and/or display of the parental controls in certain application scenarios
• Fixed Repeaters sometimes used external NTP servers for initial time determination even if the upstreamFRITZ!Box offered an NTP server
• Fixed Under certain circumstances a switch to public DNS servers occurred although the current DNS server could be reached
• Fixed Under certain circumstances a switch to public DNS servers took place too early
• Fixed VPN: When configuring an IPSec-LAN-LAN connection, the address of the FRITZ!Box was not proposed
• Fixed When all IPv4 data traffic was routed over a WireGuard VPN connection, incoming calls were not always signaled
• Fixed When packet acceleration was enabled during longer LAN-LAN linkups to CISCO remote sites via IPSec, occasional connection losses occurred

Wi-Fi:

• Fixed Mesh Repeater operating mode: The "Select Wi-Fi Network" list did not display invalid Wi-Fi network names (SSID)

Mesh:

• Fixed After changing the connection of a repeater, the connection display on the "Home Network > Mesh" page of the user interface was wrong
• Fixed When using certain powerline adapters together with a network switch, the connection display on the "Home Network > Mesh" page of the user interface was wrong

Telephony:

• Improved Robuster handling of inconsistent data in Apple telephone contacts
• Improved Support for using up to 10 individual telephone numbers (MSNs) with the "Telekom CompanyFlex" rate
• Change Outdated entries removed from the list of telephone providers

DECT:

• Improved Support for DECT headsets from the Sennheiser EPOS series for outgoing calls and picking up calls via the headset button

Home Network:

• Fixed Devices with a dot in their name could no longer be renamed
• Fixed Display for search for updates for devices in the Mesh was not suitable in certain cases
• Fixed Possibly lacking rendering of IP addresses could cause subsequent defects

System:

• Fixed "Change notice" push service sent too often information on supposedly new port sharing
• Fixed Repeater events were occasionally listed twice in the Event Log
• Fixed There were too many events on changed settings in the Event Log

Mobile Network:

• Improved Internet connection with username/password supported for Alcatel IK41VE1 IoT/M2M 4G (MBIM) mobile network dongle (not FRITZ!Box 5530, not FRITZ!Box 68xx)

USB:

• Fixed No network drive function (SMB) could be established to Rclone
• Fixed WebDAV online storage could not be used when the country was set to "Spain"

Additional improvements in FRITZ!OS 07.50

DSL:

• Improved Higher connection quality and stability to multiple remote sites
• Improved Adjusted calculation of available bandwidth in the user interface

Internet:

• Improved When the DNS server of the internet provider (or the listed DNS server) is interrupted, automatic switch to the public DNS server
• Improved Failure detection via DNS validation added for "Expanded failover protection"
• Improved FRITZ!Box services (SMT, FTP, IGD and TR-064) offered via Bonjour or mDNS
• Improved Unwanted queries from certain IP addresses to FRITZ!Box services can be blocked with the new IP block list
• Improved "QUIC" added to the internet protocols supported by parental controls
• Improved When internet access to storage media via FTP/FTPS is enabled, the randomly preselected port number is displayed
• Improved Support for VPN user dial-in for Android mobile telephones and tablets with IKEv2 IPSec (preshared key)
• Improved Optimized upload and download speeds by adjusting the TCP segment size (MSS clamping), now also for IPv6-based connections
• Improved IPv4 VPN connections (IPSec) can be tunneled via IPv6, for instance to reach FRITZ!Box devices on DS Lite connections (IP6 tunnel for IPv4, IPv4-inIPv6)
• Improved VPN packet acceleration supported in IPSec
• Improved In the user interface, an image now illustrates the different types of VPN connections
• Improved No publication of IPv4 address to MyFRITZ!Net on dual-stack connections with carrier-grade NAT; MyFRITZ! address always resolved here into the IPv6 address
• Improved After a restart, the FRITZ!Box refreshes its IP address with MyFRITZ!Net immediately (DynDNS update)
• Improved A FRITZ!Box in "Mesh Repeater" mode is automatically registered with the MyFRITZ! account of the Mesh Master
• Improved IPv6 on the FRITZ!Box enabled by default for all internet connections
• Improved FRITZ!Box can be operated on IPv6-only connections
• Improved Support for IPv6 during prioritization of network applications and prioritization of a home network device
• Improved The IPv6 Interface Identifier used on the WAN port is chosen at random
• Improved Improved tips and error messages on sharing ports on DSL Lite connections with PCP support
• Improved Data traffic from Wi-Fi calling (VoWifi) with smartphones prioritized over the FRITZ!Box internet connection
• Change Predefined selection of DynDNS providers replaced by a general settings option
• Change The "IPv6" tab is displayed for IPv6-only connections
• Change Support for the User Service Platform specification (USP, Broadband Forum TR-369) and configuration on the "Provider Services" tab
• Change The NetBIOS filter can be displayed and configured (FRITZ!Box Cable only)
• Change When a new port sharing setting is created, the outdated "eMule" application is no longer listed
• Change Outdated entries removed from the provider list for internet access
• Fixed The ICMP identifier for pings was set to 0 by the FRITZ!Box in some rare cases
• Fixed The FRITZ!Box could send an invalid Phase1 ID for VPN user dial-in via IPSec
• Fixed The entry field for the IPv6 LAN prefix was too small
• Fixed The IPv6 address could not be entered manually for IPv6 port sharing
• Fixed Devices in the guest network with a captive portal were not connected to the internet via IPv6
• Fixed IPv6: When SLAAC was used and the DHCPv6 server was disabled in the FRITZ!Box, after a restart IPv6 could not longer be used in the home network
• Fixed In individual cases, deletion of a port sharing setting deleted additional port sharing settings of the same device
• Fixed VPN connections (IPSec) to StrongSWAN via IPv6 failed under some circumstance
• Fixed VPN connections (LAN-LAN) could not be saved without a name
• Fixed In some scenarios the FRITZ!Box's NTP server did not work after re-establishing the internet connection
• Fixed Under certain circumstances, not all DNS servers made available by the provider were used

Wi-Fi:

• Improved When a radar event is detected, the system attempts to hold the channel with reduced bandwidth
• Improved When encryption on the Mesh Master is changed to "non-encrypted", activation of the 5-GHz Wi-Fi network is ensured and wireless devices are correctly deregistered if necessary
• Improved Data rates increased when exchanging data with certain wireless devices
• Improved The legend below the "Allocation of Wi-Fi Channels" diagram on the "Wi-Fi / Wi-Fi Channels" page is now displayed in a single line
• Improved Optimized automatic channel selection when checking for prioritized use in the 5-GHz Wi-Fi network
• Improved The adjustment of radio channel settings in the 5-GHz frequency band now allows all channel numbers to be selected
• Improved The overlay with message on the "Load on the Current Wi-Fi Channel" diagram is now also shown when VHT160 mode is enabled
• Change New message under "System / Event Log" when a new session key was negotiated (encrypted connections compliant with the WPA3/SAE standard)
• Change Restructuring of the "Wi-Fi > Wi-Fi Network", "Wi-Fi > Security", and "Wi-Fi > Wi-Fi Channel" pages
• Change MAC address filters are limited to a maximum of 128 entries
• Fixed On the user interface for the "Wi-Fi Guest Access", starting the WPS quick connection was linked with the "Wi-Fi / Security / WPS" page
• Fixed Incorrect information when Wi-Fi disabled when "Internet connection via Wi-Fi" is selected
• Fixed The period for displaying the load on the Wi-Fi channel could not be changed in the user interface when the 2.4-GHz Wi-Fi network was disabled
• Fixed Sorting of "Other Wi-Fi Networks in Your Vicinity" table by name did not always work reliably ("Wi-Fi / Wi-Fi Channel" page)
• Fixed Preset name for Wi-Fi guest access linked to the language selection
• Fixed When a WPS quick connection was started during the check for higher-priority users (e.g. radar), an incorrect message could be displayed under "System / Events"

Mesh:

• Improved Higher data throughputs in the Mesh Wi-Fi possible thanks to dynamic smart repeating
• Improved Display of home network connections on the "Mesh" page of the user interface responds more quickly to changes
• Improved Home network devices (e.g. printers or NAS) displayed in the "Mesh Overview" can be opened directly by link
• Improved Changed country and language settings of the Mesh Master are automatically transmitted to the Mesh Repeater
• Improved New message in "System / Event Log" when FRITZ!OS removes a network loop
• Improved "Mesh Overview" now shows network switches that use the LLDP protocol
• Improved "Mesh Overview" now shows deployed network switches or access points in sequence
• Improved Indication on the start page of the user interface when there are FRITZ! devices in the home network that are not yet enabled for Mesh
• Improved Region and language settings of the FRITZ!Box are adopted by FRITZ!Repeater(s)
• Change Registration of new Mesh Repeaters with the "Connect" button supports the "Wi-Fi 6 Device Provisioning Protocol (DPP)"

Telephony:

• Improved Online contacts from web.de, gmx.de, and 1&1 converted to CardDAV
• Improved Revised display of table of configured call diversions
• Improved Encrypted telephony more robust against lost connections
• Improved Optimization for integration of a telephone book into Mesh
• Improved Designation of a caller's telephone number in the call list, even when a telephone number specified by the caller was also transmitted
• Improved Optimization of automatic configuration of telephone numbers by the internet provider
• Improved Reworked texts for push services on fax function and answering machines on fax function and answering machine
• Improved Support for more call scenarios with voice data transmission before call acceptance (P-Early-Media)
• Improved Wizard for telephony devices enables configuration of internal fax function without enabling fax reception
• Improved Display of certain table columns in the "Telephone Numbers" can be switched on or off
• Improved CAPI over TCP can be disabled if desired via "Diagnostics / Security"
• Improved Prioritization of telephony data adjusted to comply with the Deutsche Telekom specification 1TR112 V14
• Improved FRITZ!Box takes note of the last 20 destination telephone numbers for call diversion and offers these when new call diversion settings are configured
• Improved For messages on the answering machine, the name that matches the caller's number in the telephone book, or the location and telephone number, can be announced while listening to messages
• Improved Call diversion settings and call blocks for incoming calls can be restricted to a single telephone number in the home network
• Improved Supports groups for online contacts from Apple
• Improved Support for photos for online contacts from Apple, Telekom, and CardDAV providers
• Change Different designations in the user interface for telephones on the "FON 1" and "FON 2" jacks
• Fixed If the internal fax machine was used with the "only send" setting, incoming calls were not logged in the call list
• Fixed Newly created telephone numbers could not always be edited retroactively
• Fixed Root number was not displayed when the settings of the SIP DDI line were edited
• Fixed Umlauts in the names of telephony devices were sometimes converted into special characters
• Fixed Under certain rare conditions, the initiator of a three-party conference was not able to hear the two other parties

DECT/FRITZ!Fon:

• Improved Higher resolution of images from Google online contacts
• Improved Convenient control of DECT headsets that are GAP or CAT-iq 2.x-compliant
• Improved Quick dial for number keys 2 to 9 can be set up directly on the FRITZ!Fon by pressing and holding the numbers
• Improved More convenient use of DECT handsets
• Improved Three new ringtones with bird sounds available for FRITZ!Fon ("Whistling", "In the Woods" and "Yardbirds") (configured under "MENU / Settings / Audio / Ringtone / Own ringtone")
• Change Missed calls older than 28 days are no longer signaled by a message key blinking red on the FRITZ!Fon

Home Network:

• Improved Reworked details pages for network devices
• Improved FRITZ!Powerline devices can be restarted in the "Device Details" of the FRITZ!Box user interface under "Home Network / Network" or registered by clicking a button
• Improved Own network device highlighted in the overviews of the user interface
• Improved More flexibility when assigning your own names for a network device in the home network for display in the user interface: Spaces and special characters are allowed
• Improved The symbol in the user interface for prioritized network devices was updated
• Improved Reworked user guidance through changing of the FRITZ!Box name

Smart Home:

• Improved Template for radiator controls expanded with addition of comfort temperature and cool-down temperature as well as antifreeze and boost functions
• Improved Sunrise/sunset schedule with more settings options independent of sunrise and sunset
• Improved The "Adaptive heating start" function can be disabled for radiator controls
• Change "Smart Home" menu subdivided into "Devices & Groups", "Automation" and "Operation"

USB:

• Improved Media data are read in completely with "Refresh index"
• Improved A list of FRITZ!Box users with the right to access NAS contents is displayed under "Home Network Sharing"
• Improved A message appears indicating when the maximum number of sharing links is exceeded
• Improved After completion of fax configuration, a USB folder for storing faxes can be selected under "Settings for the Fax Function"
• Change When uploading files to fritz.nas, the creation date of the respective file is now displayed
• Change MagentaCloud removed as a media source in the internet because API is no longer compatible
• Change After indexing, the ".start_indexation.mp3" file is no longer displayed via SMT/FTP
• Fixed Added radio stations were displayed only after manual indexing
• Fixed After starting operation of "FRITZ!Box as Mesh Repeater", the network drive function (SMB) was not always available
• Fixed Accessing a sharing link allowed the creation of additional sharing settings
• Fixed During the slide show of FRITZ!NAS images, the control for the duration of the display was not displayed correctly
• Fixed Folders in the uppermost level of the directory structure were not displayed in the selection dialog for moving files

System:

• Improved New display of Wi-Fi connections between FRITZ! devices
• Improved Summary of information areas on the "Overview" page for better orientation
• Improved New design and improved operation concept for logging in to the FRITZ!Box user interface <for more on this, see [4]>
• Improved Revised layout of the FRITZ!Box user interface <for more on this, see [4]>
• Improved Changed operating concept for changing settings in the user interface <for more on this, see [4]>
• Improved Under "System / FRITZ!Box Users / Apps", the FRITZ!Box user from which each app has been configured is displayed for each app
• Improved The "Forgot Password" push service email now contains information on the device that requested this mail
• Improved If desired, the selection list of FRITZ!Box users can be hidden during login to the user interface from the home network
• Change Simplified flashing behavior of the FRITZ!Box LEDs when connection is triggered by the "Connect" button
• Change The hyperlinks for Contents, Manual, Tips & Tricks, en.avm.de, and Legal Notice are now located under "Help and Info"
• Change New contents under "Help and Info / Get to Know the Functions"
• Change Additional confirmation for configuring certain settings can no longer be switched off <for more on this, see [6]>
• Change The push service for the Wi-Fi guest access sends registration and deregistration events of the guest devices from the Mesh Repeater or Mesh Master with which the devices are registered
• Fixed The display of several "Exposed Hosts" for two different devices under "Diagnostics / Security" was sometimes misleading

Mobile network:

• Improved Expanded failover protection supports smartphones and mobile network dongles with tethering function
• Improved Failure detection via DNS validation added for expanded failover protection
• Change Simple failover protection removed - existing configurations are converted to expanded failover protection
• Fixed Page at "Internet / Mobile Network" was empty when a mobile broadband dongle was inserted

Security:

• Improved Use of a random SIP port possible under "Telephony / Telephone Numbers / Line Settings / Security"
• Improved All a user's rights listed under "System / FRITZ!Box Users"
• Improved Information about security methods currently used on SIP remote sites under "Diagnostics / Security / Telephony"
• Improved Display of the last ACS connections under "Diagnostics / Security / Provider Services (TR069)"
• Improved While login is blocked due to an incorrect password entry, the password entry field can be edited for the next login attempt
• Improved SIP port can be reached from the internet only by the set protocol (IPv4 or IPv6)
• Improved Protection from frequent login attempts with incorrect password via the SMB protocol

FRITZ!Apps:

• Improved FRITZ!Apps support with explanation of where the preset FRITZ!Box password is found on the FRITZ!Box
• Improved MyFRITZ!App shows when internet access is blocked for each home network device
• Improved MyFRITZ!App with additional connection information for the home network devices
• Improved When MyFRITZ!App is registered with a FRITZ!Box that has not yet been configured, MyFRITZ!App indicates this and offers to open the browser for configuration
• Improved MyFRITZ!App displays Wi-Fi dual-band connections for "Your Mesh" in the overview diagram
• Improved MyFRITZ!App reliably displays Mesh connection paths graphically, even for more complex constellations
• Improved MyFRITZ!App indicates when Mesh functions have not been enabled in the Mesh Repeater
• Improved MyFRITZ!App sets the name of the smartphone or tablet as the name of the network device in the home network of the FRITZ!Box if no name was assigned yet (for Android)
• Improved MyFRITZ!App supports the convenience function of call diversion for callers "not in the telephone book"
• Improved FRITZ!App WLAN displays the channel bandwidth of the Wi-Fi connection
• Improved FRITZ!App Smart Home displays the adaptive heating (preheating phase) of radiator controls
• Improved FRITZ!App Smart Home displays open window detection with a window sensor on the radiator control
• Improved FRITZ!App Smart Home supports the creation of templates for the current light setting
• Improved FRITZ!App Smart Home displays a message when applying templates

Improvements in FRITZ!OS 07.30

Fiber:

• Improvement Enhanced interoperability to certain GPON OLT with certain profile settings

Internet: 

• Improvement Fiber access settings for Deutsche Telekom with "Easy-Support" integrated
• Improvement New internet access settings for Italian and Dutch service providers integrated

FRITZ!OS 7.29 Initial Release

General information on Mesh is presented at en.avm.de/mesh-networking.

Instructions for installing the update:

Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen.

(c) AVM GmbH 2004-2024. All rights reserved.

This AVM firmware package contains files that are propagated under different licenses, in particular under a license held by AVM or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt). The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de.

AVM grants the non-exclusive right to use this AVM firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee. Without previous approval in writing, and except for in cases permitted by law, it is particularly forbidden for this AVM firmware packet to be

• copied, propagated, or in any other manner made publicly accessible, or
• processed, disassembled, reverse engineered, translated, decompiled or in any other manner "opened" and subsequently copied, propagated or made publicly accessible in any other manner.

HKR 2024/10/24 ..