Updatenieuws

Product: 	FRITZ!Repeater 600
 
Version:        FRITZ!OS 7.58

Language:       German, English, French, Italian, Spanish, Polish, Dutch

Release Date:   03/11/2024

New features with FRITZ!OS 7.58

Further Improvements of FRITZ!OS 7.58

• Fixed Network devices were sometimes incorrectly displayed as belonging to a guest network
• Fixed Robustness when transmitting very small network packets (UDP) was increased
• Fixed Sometimes repeater was briefly displayed with an incorrect IP address in the FRITZ!Box

New features with FRITZ!OS 7.57

• Changed country and language settings of the FRITZ!Box (Mesh Master) are automatically transmitted to the FRITZ!Repeater
• Improved handling of Wi-Fi auto channel

Further Improvements of FRITZ!OS 7.57

• Fixed stability and security increased

Improvements and changes with FRITZ!OS 7.56

Improved - Changed behavior of buttons at the lower end of the page Improved - Several improvements of the user interface Improved - Stability and performance improvements

Changed - The push service for the Wi-Fi guest access sends registration/deregistration events of the guest devices from the Mesh Repeater or Mesh Master with which they are registered Changed - Expanded keyword search in the menu under "Help and Info"; display of results in the Help Changed - New contents under "Help and Info > Get to Know the Functions" Changed - MAC Filter is limited to 128 entries

**New Features in FRITZ!OS:**

**New Features**

- Improved assistent for inital setup 
- Improved WiFI stability and performance

**Additional improvements in FRITZ!OS 7.29**

- **Improved** Improved interoperability with other WiFi-Routers
- **Improved** List of trusted certification authorities updated
- **Improved** Stability improvements

**Additional improvements in FRITZ!OS 7.27**

- **Improved** Improved confirmation message when adoption of settings in the Mesh disabled
- **Improved** Improved confirmation message when network settings changed
- **Improved** Improved messages on Wi-Fi under "System / Event Log"
- **Improved** Detection of multiple parallel WPS activations improved
- **Improved** Naming of Wi-Fi guest access (SSID, preassigned) depends on selected language
- **Fixed** Vulnerabilities in the processing of incoming fragmented frames and aggregated MPDUs (A-MPDU) fixed ("Fragatttack")
- **Fixed** WPS for the Wi-Fi Guest Access did not work reliably with non-encrypted Wi-Fi
- **Fixed** Interruption while streaming video when using IPv6 connections
- **Fixed** - Improved maximum throughput when used with current Apple iOS and MacOS devices
- **Fixed** Wrong tip regarding the use of the FRITZ!Box password when mesh is not activated 
- **Fixed** Changes in the network settings were not applied when the user switched between different settings
- **Fixed** Number of messages in "System / Event Log" was too smal in some areas
- **Fixed** When parallel WPS registrations were detected they were not ended reliably
- **Fixed** Wrong default country after setting factory defaults (only for german editions of FRITZ!Repeater)
- **Fixed** The "Support" page could no longer be opened directly
- **Fixed** Unintentional display of LAN port settings
- **Fixed** Wrong timestamp for the last FRITZ!OS update
- **Fixed** Incorrect message under "System / Event Log" for WPS during DFS wait time


------------------------------------------------

Enabling the Mesh Function

To check whether a FRITZ! product is enabled for Mesh, see the "Mesh Overview" of the FRITZ!Box (the Mesh Master) under "fritz.box / Home Network / Mesh".
Here the products in the Mesh are designated with a corresponding "Mesh active" icon.

A FRITZ!Repeater or FRITZ!Powerline adapter can be enabled for Mesh in various ways:
- If the FRITZ!Repeater or FRITZ!Powerline adapter has the factory settings configured and is being connected with the FRITZ!Box via WPS for the first time, it will be automatically enabled for Mesh.
- If the FRITZ!Repeater or FRITZ!Powerline adapter is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box.
On the FRITZ!Box, use the button that initiates WPS: depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS" button for 6 seconds

Detailed instructions, additional information and the answers to frequently asked questions about Mesh are presented at en.avm.de/mesh-faq.


-----------------------------------------------


**Setting factory defaults**
For restoring the repeater to factory defaults, press the "Connect" button for 15 seconds after the repeater is started up

-----------------------------------------------

We recommend to always keep all your FRITZ!-Products up to date as every update also improves security features of FRITZ!Box and FRITZ!Repeater


KSH/SST20230904